APV-12 series
October 25, 2022APV-25 series
October 26, 2022MW Mean Well Meanwell 16W Single Output Switching Power Supply APV-16 series
Features
- Constant voltage design
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Fully isolated plastic case
- Cooling by free air convection
- Small and compact size
- Class Ⅱ power unit, no FG
- Class 2 power unit
- Pass LPS
- IP42 design
- Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
- 100% full load burn-in test
- Low cost, high reliability
- 2 years warranty
Mean Well LED Driver APV-16 Series Data Sheet Download
Description
Mean Well LED driver APV-16 series is one 16W AC/DC constant voltage mode single output LED power supply. It accepts the full range input 90~264VAC and provides three models with different output voltage, 5V(APV-16-5), 12V(APV-16-12), 15V(APV-16-15), 24V(APV-16-24), respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, APV-16 ideally fits the entry-level LED applications. In this family, the other series are APV-8 series, APV-12 series, APV-25 series and APV-35 series.
Specification
MODEL | APV-16-5 | APV-16-12 | APV-16-15 | APV-16-24 | |||
OUTPUT |
DC VOLTAGE | 5V | 12V | 15V | 24V | ||
RATED CURRENT | 2.6A | 1.25A | 1A | 0.67A | |||
CURRENT RANGE | 0 ~ 2.6A | 0 ~ 1.25A | 0 ~ 1A | 0 ~ 0.67A | |||
RATED POWER | 13W | 15W | 15W | 16.08W | |||
RIPPLE & NOISE (max.) Note.2 | 100mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | |||
VOLTAGE TOLERANCE Note.3 | ±5.0% | ||||||
LINE REGULATION | ±1.0% | ||||||
LOAD REGULATION | ±2.0% | ||||||
SETUP, RISE TIME | Note.6 | 1500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load | |||||
HOLD UP TIME (Typ.) | 20ms/230VAC 12ms/115VAC at full load | ||||||
INPUT |
VOLTAGE RANGE | Note.4 | 90 ~ 264VAC 127 ~ 370VDC | ||||
FREQUENCY RANGE | 47 ~ 63Hz | ||||||
EFFICIENCY (Typ.) | 76% | 80% | 81% | 83% | |||
AC CURRENT | 0.3A/230VAC 0.5A/115VAC | ||||||
INRUSH CURRENT(Typ.) | COLD START 50A (twidth=250μs measured at 50% Ipeak) at 230VAC | ||||||
MAX. No. of PSUs on 16A CIRCUIT BREAKER | 13 units (circuit breaker of type B) / 22 units (circuit breaker of type C) at 230VAC | ||||||
LEAKAGE CURRENT | 0.25mA / 240VAC | ||||||
PROTECTION |
OVER LOAD | Above 105% rated output power | |||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed | |||||||
OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16V | 17.5 ~ 21V | 27.6 ~ 32.4V | |||
Protection type: Shut off o/p voltage, clamping by zener diode | |||||||
ENVIRONMENT |
WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) | |||||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||||
STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | ||||||
TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | ||||||
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||||||
SAFETY & EMC |
SAFETY STANDARDS Note.8 | UL8750, CSA C22.2 No.250.0-08, BIS IS15885(except for 15V), EAC TP TC 004,IP42 ,
BS EN/EN 62368-1 approved |
|||||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | ||||||
ISOLATION RESISTANCE | I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH | ||||||
EMC EMISSION | Compliance to BS EN/EN55032, BS EN/EN61000-3-2, BS EN/EN61000-3-3, EAC TP TC 020 | ||||||
EMC IMMUNITY | Compliance to BS EN/EN55024, BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), EAC TP TC 020 | ||||||
OTHERS |
MTBF | 7265.5K hrs min. Telcordia SR-332 (Bellcore); 1128.9K hrs min. | MIL-HDBK-217F (25℃) | ||||
DIMENSION | 77*40*29mm (L*W*H) | ||||||
PACKING | 0.1Kg; 120pcs/14Kg/1.06CUFT |
Application
Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)