LPV-35 series
November 14, 2022
LPV-100 series
November 14, 2022MW Mean Well Meanwell 60W Single Output Switching Power Supply LPV-60 series
Features
- Constant voltage design
- Universal AC input / Full range
- Withstand 300VAC surge input for 5 seconds
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- Fully encapsulated with IP67 level
- Fully isolated plastic case
- Class II power unit, no FG
- Class 2 power unit
- Pass LPS
- Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
- 100% full load burn-in test
- Low cost, high reliability
- 2 years warranty
Mean Well LED Driver LPV-60 Series Data Sheet Download
Specification
| MODEL | LPV-60-5 | LPV-60-12 | LPV-60-15 | LPV-60-24 | LPV-60-36 | LPV-60-48 | ||||
|
OUTPUT |
DC VOLTAGE | 5V | 12V | 15V | 24V | 36V | 48V | |||
| RATED CURRENT | 8A | 5A | 4A | 2.5A | 1.67A | 1.25A | ||||
| CURRENT RANGE | 0 ~ 8A | 0 ~ 5A | 0 ~ 4A | 0 ~ 2.5A | 0 ~ 1.67A | 0 ~ 1.25A | ||||
| RATED POWER | 40W | 60W | 60W | 60W | 60W | 60W | ||||
| RIPPLE & NOISE (max.) Note.2 | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | ||||
| VOLTAGE TOLERANCE Note.3 | ±8.0% | ±5.0% | ||||||||
| LINE REGULATION | ±1.0% | |||||||||
| LOAD REGULATION | ±6.0% | ±2.0% | ||||||||
| SETUP, RISE TIME | Note.6 | 500ms, 20ms / 230VAC 500ms, 20ms / 115VAC at full load (for 5~36V); 500ms, 30ms / 230VAC 500ms, 30ms / 115VAC at full load(for 48V) | ||||||||
| HOLD UP TIME (Typ.) | 50ms/230VAC 16ms/115VAC at full load | |||||||||
|
INPUT |
VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC | ||||||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||||||
| EFFICIENCY (Typ.) | 76% | 83% | 83% | 86% | 86% | 86% | ||||
| AC CURRENT (Typ.) | 1.2A/115VAC 1A/230VAC | |||||||||
| INRUSH CURRENT(Typ.) | COLD START 60A (twidth=525μs measured at 50% Ipeak) at 230VAC | |||||||||
| MAX. No. of PSUs on 16A CIRCUIT BREAKER | 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | |||||||||
| LEAKAGE CURRENT | 0.25mA / 240VAC | |||||||||
|
PROTECTION |
OVER LOAD | 110 ~ 150% rated output power | ||||||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||
| OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | 41.4 ~ 48.6V | 55.2 ~ 64.8V | ||||
| Protection type: Shut down o/p voltage, re-power on to recover | ||||||||||
|
ENVIRONMENT |
WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) | ||||||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | |||||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | |||||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||||||
|
SAFETY & EMC |
SAFETY STANDARDS |
UL879(except for LPV-60-5), UL1310(except for LPV-60-5), CSA C22.2 No. 207-M89(except for LPV-60-5, LPV-60-48), CAN/CSA C22.2 No. 223-M91(except for LPV-60-5, LPV-60-48), BIS IS15885(for LPV-60-12, LPV-60-24 only),
EAC TP TC 004, IP67, IEC62368-1, BS EN/EN62368-1 approved |
||||||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC | |||||||||
| ISOLATION RESISTANCE | I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH | |||||||||
| EMC EMISSION | Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A, BS EN/EN61000-3-3, EAC TP TC 020 | |||||||||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, light industry level, EAC TP TC 020 | |||||||||
|
OTHERS |
MTBF | 5188.4K hrs min. Telcordia SR-332 (Bellcore); | 732.1Khrs min. | MIL-HDBK-217F (25℃) | ||||||
| DIMENSION | 162.5*42.5*32mm (L*W*H) | |||||||||
| PACKING | 0.4Kg; 32pcs/13.8Kg/0.63CUFT | |||||||||
Packing Information
| Net Weight | 0.40kg/PCS, 12.80kg/carton |
| Gross weight | 13.80kg/carton |
| Quantity | 32PCS/ carton |
| Carton Size | 40.5cm(L)*28cm(W)*17cm(H) |
Mean Well LED Driver LPV-60 Series Video Show
*This model No. of the Mean Well LED driver in this video is LPV-60-12.
