DDR-30 series
March 20, 2023MW Mean Well Meanwell 15W DIN Rail Type DC-DC Converter DDR-15 Series
Features
- Width only 17.5mm (1SU)
- 4:1 ultra wide input range
- -40~+85℃ wide working temperature
- No minimum load required
- DC output adjustable (±10%)
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit / Overload / Over voltage / Input reverse polarity / Input under voltage protection
- 4KVdc I/O isolation(Reinforced isolation)
- 3 years warranty
Mean Well DC-DC Converter DDR-15 Series Data Sheet Download
Description
DDR-15 series is a 15W DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, ultra slim width (17.5mm), 4: 1 ultra wide input voltage, -40~+85℃ wide operating temperature, 4KVdc I/O isolation, adjustable output voltage (± 10%) and full protective functions…etc. This series has two input options: 9~36V /18~75V and various output options: 3.3V / 5V / 12V / 15V / 24V and can be used for industrial control, security control, communication system and other fields. Suitable applications are DC buck/boost regulator, increasing system insulation level and voltage drop compensation along cable…etc.
Mean Well DC-DC Converter DDR-15 Series Model Encoding
Specification
MODEL | DDR-15G-3.3 | DDR-15G-5 | DDR-15G-12 | DDR-15G-15 | DDR-15G-24 | |||
OUTPUT |
DC VOLTAGE | 3.3V | 5V | 12V | 15V | 24V | ||
RATED CURRENT | 3.5A | 3A | 1.25A | 1A | 0.63A | |||
CURRENT RANGE | 0 ~ 3.5A | 0 ~ 3A | 0 ~ 1.25A | 0 ~ 1A | 0 ~ 0.63A | |||
RATED POWER | 11.6W | 15W | 15W | 15W | 15W | |||
RIPPLE & NOISE (max.) Note.2 | 50mVp-p | 50mVp-p | 60mVp-p | 75mVp-p | 100mVp-p | |||
VOLTAGE ADJ. RANGE | 3.0 ~ 3.6V | 4.5 ~ 5.5V | 9 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 28V | |||
VOLTAGE TOLERANCE Note.3 | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | |||
LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||
LOAD REGULATION | ±1.5% | ±1% | ±0.5% | ±0.5% | ±0.5% | |||
SETUP, RISE TIME | 120ms, 85ms at full load | |||||||
HOLD UP TIME (Typ.) | G-type: 8ms@24Vdc input | |||||||
EXTERNAL CAPACITANCE LOAD (Max.) | 3300μF | 3300μF | 1200μF | 1200μF | 680μF | |||
INPUT |
VOLTAGE RANGE Note.4 | 9 ~ 36Vdc | ||||||
EFFICIENCY (Typ.) | 84% | 84% | 85% | 85% | 86% | |||
DC CURRENT (Typ.) | 0.8A /24Vdc | |||||||
INRUSH CURRENT (Typ.) | 15A /24Vdc | |||||||
PROTECTION |
OVERLOAD | 110 ~ 150% rated output power | ||||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||
OVER VOLTAGE | 3.8 ~ 4.7V | 5.75 ~ 7V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 28.8 ~ 32.4V | |||
Protection type: Shut down o/p voltage, re-power on to recover | ||||||||
REVERSE POLARITY | By internal MOSFET, no damage, recovers automatically after fault condition removed | |||||||
UNDER VOLTAGE LOCKOUT | Power ON≥9V, OFF≤8.5V | |||||||
ENVIRONMENT |
WORKING TEMP. | -40 ~ +85℃ (Refer to “Derating Curve”) | ||||||
WORKING HUMIDITY | 5 ~ 95% RH non-condensing | |||||||
STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 5 ~ 95% RH non-condensing | |||||||
TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 60℃) | |||||||
VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | |||||||
OPERATING ALTITUDE | 5000 meters | |||||||
SAFETY & EMC (Note 5) |
SAFETY STANDARDS | UL 62368-1, IEC 62368-1, AS/NZS 62368.1, EAC TP TC 004 approved | ||||||
WITHSTAND VOLTAGE | I/P-O/P:4KVdc | |||||||
ISOLATION RESISTANCE | I/P-O/P>100M Ohms / 500Vdc / 25℃/ 70% RH | |||||||
EMC EMISSION |
Parameter | Standard | Test Level / Note | |||||
Conducted | BS EN/EN55032 | Class B | ||||||
Radiated | BS EN/EN55032 | Class B | ||||||
Voltage Flicker | BS EN/EN61000-3-3 | —– | ||||||
EMC IMMUNITY |
BS EN/EN55035, BS EN/EN61000-6-2(BS EN/EN50082-2) | |||||||
Parameter | Standard | Test Level / Note | ||||||
ESD | BS EN/EN61000-4-2 | Level 3, 8KV air; Level 3, 6KV contact; criteria A | ||||||
Radiated | BS EN/EN61000-4-3 | Level 3, 10V/m; criteria A | ||||||
EFT / Burst | BS EN/EN61000-4-4 | Level 3, 2KV; criteria A | ||||||
Surge | BS EN/EN61000-4-5 | Level 3, 1KV/Line-Line; criteria A | ||||||
Conducted | BS EN/EN61000-4-6 | Level 3, 10V; criteria A | ||||||
Magnetic Field | BS EN/EN61000-4-8 | Level 4, 30A/m; criteria A | ||||||
OTHERS |
MTBF | 3446.2K hrs min. Telcordia SR-332 (Bellcore); 907.2K hrs min. MIL-HDBK-217F (25℃) | ||||||
DIMENSION | 17.5*90*54.5mm (W*H*D) | |||||||
PACKING | 68g; 160pcs/12Kg/1.14CUFT |
Applications
- Industrial control system
- Semi-conductor fabrication equipment
- Factory automation
- Electro-mechanical
- Wireless network
- Telecom or datacom system