DDR-15 series
March 20, 2023
DDR-60 series
March 20, 2023MW Mean Well Meanwell 30W DIN Rail Type DC-DC Converter DDR-30 Series
Features
- Width only 35mm (2SU)
- 4:1 ultra wide input range
- -40~+85℃ wide working temperature
- No minimum load required
- DC output adjustable (±10%)
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit / Overload / Over voltage / Input reverse polarity / Input under voltage protection
- 4KVdc I/O isolation(Reinforced isolation)
- 3 years warranty
Mean Well DC-DC Converter DDR-30 Series Data Sheet Download
Description
DDR-30 series is a 30W DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, ultra slim width (35mm), 4:1 ultra wide input voltage, -40~+85℃ wide operating temperature, 4KVdc I/O isolation, adjustable output voltage (± 10%) and full protective functions…etc. This series has two input options: 9~36V /18~75V and various output options: 5V / 12V / 15V / 24V and can be used for industrial control, security control, communication system and other fields. Suitable applications are DC buck/boost regulator, increasing system insulation level and voltage drop compensation along cable…etc.
Mean Well DC-DC Converter DDR-30 Series Model Encoding
Specification
| MODEL | DDR-30G-5 | DDR-30G-12 | DDR-30G-15 | DDR-30G-24 | DDR-30L-5 | DDR-30L-12 | DDR-30L-15 | DDR-30L-24 | |||
|
OUTPUT |
DC VOLTAGE | 5V | 12V | 15V | 24V | 5V | 12V | 15V | 24V | ||
| RATED CURRENT | 6A | 2.5A | 2A | 1.25A | 6A | 2.5A | 2A | 1.25A | |||
| CURRENT RANGE | 0 ~ 6A | 0 ~ 2.5A | 0 ~ 2A | 0 ~ 1.25A | 0 ~ 6A | 0 ~ 2.5A | 0 ~ 2A | 0 ~ 1.25A | |||
| RATED POWER | 30W | 30W | 30W | 30W | 30W | 30W | 30W | 30W | |||
| RIPPLE & NOISE (max.) Note.2 | 60mVp-p | 75mVp-p | 75mVp-p | 100mVp-p | 60mVp-p | 75mVp-p | 75mVp-p | 100mVp-p | |||
| VOLTAGE ADJ. RANGE | 4.5 ~ 5.5V | 9 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 28V | 4.5 ~ 5.5V | 9 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 28V | |||
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | |||
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||
| LOAD REGULATION | ±1.5% | ±0.5% | ±0.5% | ±0.5% | ±1.5% | ±0.5% | ±0.5% | ±0.5% | |||
| SETUP, RISE TIME | 120ms, 85ms at full load | ||||||||||
| HOLD UP TIME (Typ.) | G-type: 7ms@24Vdc input | L-type: 18ms@48Vdc input | |||||||||
| EXTERNAL CAPACITANCE LOAD (Max.) | 3300μF | 2200μF | 1500μF | 1000μF | 3300μF | 2200μF | 1500μF | 1000μF | |||
|
INPUT |
VOLTAGE RANGE Note.4 | 9 ~ 36Vdc | 18 ~ 75Vdc | ||||||||
| EFFICIENCY (Typ.) | 85% | 86% | 87% | 89% | 86% | 89% | 90% | 91% | |||
| DC CURRENT (Typ.) | 1.5A /24Vdc | 0.8A /48Vdc | |||||||||
| INRUSH CURRENT (Typ.) | 15A /24Vdc | 15A /48Vdc | |||||||||
|
PROTECTION |
OVERLOAD | 110 ~ 150% rated output power | |||||||||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||||||||
| OVER VOLTAGE | 5.75 ~ 7V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 28.8 ~ 34V | 5.75 ~ 7V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 28.8 ~ 34V | |||
| Protection type: Shut down o/p voltage, re-power on to recover | |||||||||||
| REVERSE POLARITY | By internal MOSFET, no damage, recovers automatically after fault condition removed | ||||||||||
| UNDER VOLTAGE LOCKOUT | 24Vin (G-type): Power ON≥9V, OFF≤8.5V | ||||||||||
| 48Vin (L-type): Power ON≥18V, OFF≤17V | |||||||||||
|
ENVIRONMENT |
WORKING TEMP. | -40 ~ +85℃ (Refer to “Derating Curve”) | |||||||||
| WORKING HUMIDITY | 5 ~ 95% RH non-condensing | ||||||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 5 ~ 95% RH non-condensing | ||||||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 60℃) | ||||||||||
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | ||||||||||
| OPERATING ALTITUDE | 5000 meters | ||||||||||
|
SAFETY & EMC (Note 5) |
SAFETY STANDARDS | UL/IEC 62368-1, AS/NZS 62368.1 approved; Design refers to UL508 | |||||||||
| WITHSTAND VOLTAGE | I/P-O/P:4KVdc | ||||||||||
| ISOLATION RESISTANCE | I/P-O/P>100M Ohms / 500Vdc / 25℃/ 70% RH | ||||||||||
|
EMC EMISSION |
Parameter | Standard | Test Level / Note | ||||||||
| Conducted | BS EN/EN55032 | Class B | |||||||||
| Radiated | BS EN/EN55032 | Class B | |||||||||
| Voltage Flicker | BS EN/EN61000-3-3 | —– | |||||||||
|
EMC IMMUNITY |
BS EN/EN55035, BS EN/EN61000-6-2(BS EN/EN50082-2) | ||||||||||
| Parameter | Standard | Test Level / Note | |||||||||
| ESD | BS EN/EN61000-4-2 | Level 3, 8KV air; Level 3, 6KV contact; criteria A | |||||||||
| Radiated | BS EN/EN61000-4-3 | Level 3, 10V/m; criteria A | |||||||||
| EFT / Burst | BS EN/EN61000-4-4 | Level 3, 2KV; criteria A | |||||||||
| Surge | BS EN/EN61000-4-5 | Level 3, 1KV/Line-Line; criteria A | |||||||||
| Conducted | BS EN/EN61000-4-6 | Level 3, 10V; criteria A | |||||||||
| Magnetic Field | BS EN/EN61000-4-8 | Level 4, 30A/m; criteria A | |||||||||
|
OTHERS |
MTBF | 2780.3K hrs min. Telcordia SR-332 (Bellcore); 483.8K hrs min. MIL-HDBK-217F (25℃) | |||||||||
| DIMENSION | 35*90*54.5mm (W*H*D) | ||||||||||
| PACKING | 0.12Kg; 96pcs/12.5Kg/1.1CUFT | ||||||||||
Applications
- Industrial control system
- Semi-conductor fabrication equipment
- Factory automation
- Electro-mechanical
- Wireless network
- Telecom or datacom system
