PSD-30 series
March 21, 2023MW Mean Well Meanwell 45W DC-DC Single Output Switching Power Supply PSD-45 Series
Features
- 2:1 wide input range
- Protections: Short circuit / Overload / Over voltage/ Reverse polarity
- Cooling by free air convection
- Built-in EMI filter, low ripple noise
- 100% full load burn-in test
- Fixed switching frequency at 96KHZ
- Low cost
- High reliability
- 2 year warranty
Mean Well DC-DC SMPS PSD-45 Series Data Sheet Download
Specification
MODEL | PSD-45A-05 | PSD-45B-05 | PSD-45C-05 | PSD-45A-12 | PSD-45B-12 | PSD-45C-12 | PSD-45A-24 | PSD-45B-24 | PSD-45C-24 | |
OUTPUT |
DC VOLTAGE | 5V | 5V | 5V | 12V | 12V | 12V | 24V | 24V | 24V |
RATED CURRENT | 6A | 9A | 9A | 2.5A | 3.75A | 3.75A | 1.25A | 1.875A | 1.875A | |
CURRENT RANGE | 0 ~ 6A | 0 ~ 9A | 0 ~ 9A | 0 ~ 2.5A | 0 ~ 3.75A | 0 ~ 3.75A | 0 ~ 1.25A | 0 ~ 1.875A | 0 ~ 1.875A | |
RATED POWER | 30W | 45W | 45W | 30W | 45W | 45W | 30W | 45W | 45W | |
RIPPLE & NOISE (max.) Note.2 | 100mVp-p | 120mVp-p | 150mVp-p | |||||||
VOLTAGE ADJ RANGE | 4.5 ~ 5.5V | 10.8 ~13.2V | 21.6 ~ 26.4V | |||||||
VOLTAGE TOLERANCE Note.3 | ± 2.0% | ± 2.0% | ± 2.0% | |||||||
LINE REGULATION | ± 1.0% | ± 1.0% | ± 0.5% | |||||||
LOAD REGULATION | ± 1.0% | ± 1.0% | ± 0.5% | |||||||
SETUP, RISE, HOLD UP TIME | 1000ms, 50ms, —-/12VDC/24VDC at full load; 1500ms,50ms, —-48VDC at full load | |||||||||
INPUT |
VOLTAGE RANGE | A: 9.2 ~18VDC (12VDC) B:18 ~ 36VDC (24VDC) C:36~72VDC (48VDC) | ||||||||
EFFICIENCY(Typ.) | 74% | 77% | 80% | 78% | 82% | 83% | 79% | 85% | 86% | |
DC CURRENT(Typ.) | 3.5A/12VDC 2.5A/24VDC 1.2A/48VDC | |||||||||
PROTECTION |
OVER LOAD | 105% -160% rated output power | ||||||||
Protection type: shut down, Re-power on after fault condition is removed | ||||||||||
OVER VOLTAGE | 5.75 ~ 6.75V/10%load | 13.8~ 16.2V/10%load | 27.6 ~ 32.4V/10%load | |||||||
Protection type: Hiccup mode, recovery automatically after fault condition is removed | ||||||||||
ENVIRONMENT |
WORKING TEMP. | -10 ~ +60℃ (Refer to output load derating curve),20~90%RH non-condensing | ||||||||
WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |||||||||
STORAGE TEMP., HUMIDITY | -20 ~ +85℃, 10 ~ 95% RH | |||||||||
TEMP. COEFFICIENT | ±0.05%/℃ (0 ~ 50℃) | |||||||||
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes | |||||||||
SAFETY & EMC |
SAFETY STANDARDS | TUV BS EN/EN62368-1, EAC TP TC 004 approved | ||||||||
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:2.0KVAC O/P-FG:0.5KVAC | |||||||||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25℃/ 70% RH | |||||||||
EMI CONDUCTION&RADIATION | Compliance to BS EN/EN55032(CISPR32) CLASS B, EAC TP TC 020 | |||||||||
EMS IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,6,8, BS EN/EN55035, BS EN/EN61000-6-1 Light industry level, EAC TP TC 020 | |||||||||
OTHERS |
MTBF | 3067.4K hrs min. Telcordia SR-332 (Bellcore); 463.9K hrs min. MIL-HDBK-217F (25℃) | ||||||||
DIMENSION | 127*76*30mm (L*W*H) | |||||||||
PACKING | 0.19Kg; 72pcs/15.6Kg/1.28CUFT |