SDR-960 series
September 22, 2023
TDR-480 series
September 26, 2023MW Mean Well Meanwell 240W Slim Three Phase Industrial DIN Rail with PFC Function TDR-240 Series
Features
- Three-Phase 340 ~ 550VAC wide range input (Dual phase operation possible)
- 63mm slim width
- Built-in passive PFC function compliance to BS EN/EN61000-3-2
- High efficiency 92% and low power dissipation
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Full power between -30~+60°c
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL61010(industrial control equipment)approved
- BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
- DC OK relay contact
- 3 years warranty
Description
TDR-240 is one economical slim 240W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 63mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 3 0 340VAC to 550VAC (Dual Phase operation possible) and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current. TDR-240 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 92 %, the entire series can operate at the ambient temperature between -30℃ and 70℃ under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL61010-1,UL61010-2-201,BSEN/EN61558-1,BSEN/EN61558-2-16,EAC TP TC 004 approved, and etc.) make TDR-240 avery competitive power supply solution for industrial applications.
Mean Well Power Supply TDR-240 Series Model Encoding
Mean Well Power Supply TDR-240 Series Data Sheet Download
Specification
| MODEL | TDR-240-24 | TDR-240-48 | ||||
|
OUTPUT |
DC VOLTAGE | 24V | 48V | |||
| RATED CURRENT | 10A | 5A | ||||
| CURRENT RANGE | 0 ~ 10A | 0 ~ 5A | ||||
| RATED POWER | 240W | 240W | ||||
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | 120mVp-p | ||||
| VOLTAGE ADJ. RANGE | 24 ~ 28V | 48 ~ 55V | ||||
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | ||||
| LINE REGULATION | ±0.5% | ±0.5% | ||||
| LOAD REGULATION | ±1.0% | ±1.0% | ||||
| SETUP, RISE TIME | 2000ms, 60ms/400VAC 1500ms, 60ms/500VAC at full load | |||||
| HOLD UP TIME (Typ.) | 20ms / 400VAC 40ms / 500VAC at full load | |||||
|
INPUT |
VOLTAGE RANGE Note.4 | Three-Phase 340 ~ 550VAC (Dual phase operation possible in connecting L1,L3,FG or L2,L3,FG) or 480 ~ 780VDC | ||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||
| POWER FACTOR (Typ.) | PF≧0.53/400VAC PF≧0.52/500VAC at full load | |||||
| EFFICIENCY (Typ.) | 92% | 92% | ||||
| AC CURRENT (Typ.) | 0.69A/400VAC 0.6A/500VAC | |||||
| INRUSH CURRENT (Typ.) | COLD START 50A | |||||
| LEAKAGE CURRENT | <2mA / 530VAC | |||||
|
PROTECTION |
OVERLOAD |
105 ~ 130% rated output power | ||||
| Protection type: Constant current limiting, unit will hiccup after 3 sec. | ||||||
|
OVER VOLTAGE |
30 ~ 36V | 56 ~ 65V | ||||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed. | ||||||
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down | |||||
| FUNCTION | DC OK REALY CONTACT RATINGS (max.) | 60VDC/0.3A, 30VDC/1A, 30VAC/0.5A resistive load | ||||
|
ENVIRONMENT |
WORKING TEMP. Note.5 | -30 ~ +70℃ (Refer to “Derating Curve”) | ||||
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing | |||||
| TEMP. COEFFICIENT | ±0.05%/℃ (0 ~ 60℃) | |||||
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | |||||
| OPERATING ALTITUDE Note.6 | 5000 meters | |||||
| OVER VOLTAGE CATEGORY | Ⅲ; According to EN61558, EN50178, EN60664-1, EN62477-1, EN60204-1; altitude up to 2000 meters | |||||
|
SAFETY & EMC (Note 7) |
SAFETY STANDARDS |
UL61010-1, UL61010-2-201, BS EN/EN61558-1, BS EN/EN61558-2-16, BIS IS13252(Part1)(only for 24V), EAC TP TC 004 approved,
design refer to AS/NZS61558-1/-2-16 |
||||
| WITHSTAND VOLTAGE | I/P-O/P:4.87KVAC I/P-FG:2.4KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | |||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH | |||||
|
EMC EMISSION |
Parameter | Standard | Test Level / Note | |||
| Conducted | BS EN/EN55032(CISPR32)/BS EN/EN61204-3 | Class B | ||||
| Radiated | BS EN/EN55032(CISPR32)/BS EN/EN61204-3 | Class B | ||||
| Harmonic Current | BS EN/EN61000-3-2 | Class A | ||||
| Voltage Flicker | BS EN/EN61000-3-3 | —– | ||||
|
EMC IMMUNITY |
BS EN/EN55035, BS EN/EN61204-3 | |||||
| Parameter | Standard | Test Level / Note | ||||
| ESD | BS EN/EN61000-4-2 | Level 4, 15KV air ; Level 4, 8KV contact | ||||
| Radiated Field | BS EN/EN61000-4-3 | Level 3 | ||||
| EFT / Burst | BS EN/EN61000-4-4 | Level 3 | ||||
| Surge | BS EN/EN61000-4-5 | Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth | ||||
| Conducted | BS EN/EN61000-4-6 | Level 3 | ||||
| Magnetic Field | BS EN/EN61000-4-8 | Level 4 | ||||
|
Voltage Dips and Interruptions |
BS EN/EN61000-4-11 |
＞95% dip 0.5 periods, 30% dip 25
periods＞ 95% interruptions 250 periods |
||||
|
OTHERS |
MTBF | 1534.9K hrs min. Telcordia SR-332(Bellcore); 215.6K hrs min. MIL-HDBK-217F (25℃) | ||||
| DIMENSION | 63*125.2*113.5mm (W*H*D) | |||||
| PACKING | 1Kg; 12pcs/13Kg/1.22CUFT | |||||
