HBG-240 series
May 4, 2022
HLG-40H series
May 16, 2022300W Constant Power Mode LED Driver HBGC-300 series
Features
- Wide input range 90 ~ 305VAC
- Full power at 60~100% max current (Constant Power )
- Built-in active PFC function
- Circular metal housing design with IP67
- Function options: output adjustable via potentiometer;
- 3 in 1 dimming (Dim to off and Isolation) ; DALI-2 dimming
- Typical lifetime>50000 hours
- 5 years warranty
Data Sheet Download
Description
HBGC-300 series is a 300W LED AC/DC driver featuring the constant power mode and high voltage output. HBGC-300 operates from 90~305VAC and offers models with different rated current ranging between 1300mA and 8670mA. Thanks to the high efficiency up to 94.5%, with the fanless design, the entire series is able to operate for -40℃~+80℃ case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover, the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. HBGC-300 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
Model Encoding
| Type | IP Level | Function | Note |
| A | IP67 | output constant power adjustable via built-in potentiometer | In Stock |
| AB | IP67 | output constant power adjustable via built-in potentiometer +
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) |
In Stock |
| ADA | IP67 | DALI-2 control technology with Io Adjustable via build-in Potentiometer | In Stock |
Specification
| MODEL | HBGC-300-L- | HBGC-300-M- | HBGC-300-H- | |
|
OUTPUT |
DEFAULT CURRENT | 1400mA | 2800mA | 5600mA |
| RATED POWER | 301.6W | 301.6W | 301.6W | |
| CONSTANT CURRENT REGION | 116 ~232V | 58 ~ 116V | 29 ~ 58V | |
| FULL POWER CURRENT RANGE | 1300~2170mA | 2600~4330mA | 5200~8670mA | |
| OPEN CIRCUIT VOLTAGE (max.) | 240V | 120V | 62V | |
| CURRENT ADJ. RANGE | 650~2170mA | 1300~4330mA | 2600~8670mA | |
| CURRENT RIPPLE | 5.0% max. @rated current | |||
| CURRENT TOLERANCE | ±5% | |||
| SET UP TIME | 500ms/230VAC, 500ms/115VAC | |||
|
INPUT |
VOLTAGE RANGE Note.2 |
90 ~ 305VAC 127VDC ~ 431VDC
(Please refer to “STATIC CHARACTERISTIC” section) |
||
| FREQUENCY RANGE | 47 ~ 63Hz | |||
|
POWER FACTOR (Typ.) |
PF≧0.97 / 115VAC, PF≧0.95 / 230VAC, PF≧0.92 / 277VAC at full load
(Please refer to “Power Factor Characteristic” section) |
|||
|
TOTAL HARMONIC DISTORTION |
THD< 10% (@ load≧50% at 115VAC/230VAC, @load≧75% at 277VAC) Please refer to “TOTAL HARMONIC DISTORTION (THD)” section | |||
| EFFICIENCY (Typ.) | 94.5% | 93.5% | 92.5% | |
| AC CURRENT (Typ.) | 3A / 115VAC 1.6A / 230VAC 1.3A / 277VAC | |||
| INRUSH CURRENT(Typ.) | COLD START 45A (twidth=1300μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | |||
| MAX. NO. of PSUs on 16A CIRCUIT BREAKER |
2 unit (circuit breaker of type B) / 4 units (circuit breaker of type C) at 230VAC |
|||
| LEAKAGE CURRENT | <0.75mA / 277VAC | |||
| NO LOAD / STANDBY POWER CONSUMPTION | Standby power consumption <0.5W for AB / ADA-Type Blank/A-Type please refer to Note. 5 | |||
|
PROTECTION |
SHORT CIRCUIT | Constant current limiting, recovers automatically after fault condition is removed | ||
|
OVER VOLTAGE |
241 ~ 275V | 121 ~ 145V | 61 ~ 78V | |
| Shut down output voltage, re-power on to recovery | ||||
| OVER TEMPERATURE | Tcase>80℃±5℃, derate power automatically by 6%/℃ max. | |||
|
ENVIRONMENT |
WORKING TEMP. | Tcase=-40 ~ +80℃ (Please refer to “OUTPUT LOAD vs TEMPERATURE” section) | ||
| MAX. CASE TEMP. | Tcase=+80℃ | |||
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH non-condensing | |||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 60℃) | |||
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | |||
|
SAFETY & EMC |
SAFETY STANDARDS |
UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; EAC TP TC 004;GB19510.1,GB19510.14; IP67 approved | ||
| DALI STANDARDS | Compliance to IEC62386-101,102,207 for ADA Type only | |||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC | |||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | |||
| EMC EMISSION | Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧50%); BS EN/EN61000-3-3, EAC TP TC 020 | |||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV), EAC TP TC 020 | |||
|
OTHERS |
MTBF | 561.2K hrs min. Telcordia SR-332(Bellcore); 154.9K hrs min. MIL-HDBK-217F (25℃) | ||
| LIFETIME Note.4 | 50000 hrs min. | |||
| DIMENSION | φ191.5mm *69mm | |||
| PACKING | 2.2Kg; 8pcs/19.8Kg/2.09CUFT | |||
Application
- Bay lighting
- Stage lighting
- Flood lighting
- Stadium lighting
- Type HL for use in class I ,Division 2
