MW Mean Well Meanwell 25W AC-DC Reliable Green Industrial Adaptor GST25A Series
Features
- Global certificates
- Universal AC input / Full range
- 3 pole AC inlet IEC320-C14,Class I power unit
- No load power consumption< 0.075W
- Energy efficiency Level VI
- Comply with EISA 2007/DoE,NRCan,Korea K-MEPS, AU/NZ MEPS.EU ErP and CoC Version 5
- Protections: Short circuit / Overload / Over voltage
- Fully enclosed plastic case
- Pass LPS
- -30-+70℃ wide range working temperature
- LED indicator for power on
Description
The Mean Well GST25A series is a highly reliable, 25W desktop style single-output green adaptor series designed to connect electrical equipment externally. It is a class I power unit (with FG), equipped with a standard IEC320-C14 AC inlet and adopts an input range from 85VAC to 264VAC.
The GST25A series supplies different models with output voltages ranging between 5VDC and 48VDC (GST25A05-P1J, GST25A07-P1J, GST25A09-P1J, GST25A12-P1J, GST25A15-P1J, GST25A18-P1J, GST25A24-P1J, GST25A28-P1J, GST25A48-P1J) to satisfy the demands of various consumer electronic devices.
This series is recognized for its ability to meet the demands of modern industrial environments while also adhering to stringent energy efficiency standards.
Mean Well Industrial Desktop Adaptor GST25A Series Model Encoding
Mean Well Industrial Desktop Adaptor GST25A Series Data Sheet Download
Specification
| ORDER NO. | GST25A05-P1J | GST25A07-P1J | GST25A09-P1J | GST25A12-P1J | GST25A15-P1J | GST25A18-P1J | GST25A24-P1J | GST25A28-P1J | GST25A48-P1J | |||
|
OUTPUT |
SAFETY MODEL NO. | GST25A05 | GST25A07 | GST25A09 | GST25A12 | GST25A15 | GST25A18 | GST25A24 | GST25A28 | GST25A48 | ||
| DC VOLTAGE Note.2 | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V | 28V | 48V | |||
| RATED CURRENT | 4.0A | 2.93A | 2.55A | 2.08A | 1.66A | 1.38A | 1.04A | 0.89A | 0.52A | |||
| CURRENT RANGE | 0 ~ 4.0A | 0 ~ 2.93A | 0 ~ 2.55A | 0 ~ 2.08A | 0 ~ 1.66A | 0 ~ 1.38A | 0 ~ 1.04A | 0 ~ 0.89A | 0 ~ 0.52A | |||
| RATED POWER (max.) | 20W | 22W | 23W | 25W | 25W | 25W | 25W | 25W | 25W | |||
| RIPPLE & NOISE (max.) Note.3 | 80mVp-p | 80mVp-p | 80mVp-p | 80mVp-p | 100mVp-p | 100mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | |||
| VOLTAGE TOLERANCE Note.4 | ±5.0% | ±5.0% | ±5.0% | ±3.0% | ±3.0% | ±3.0% | ±2.0% | ±2.0% | ±2.0% | |||
| LINE REGULATION Note.5 | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |||
| LOAD REGULATION Note.6 | ±5.0% | ±5.0% | ±5.0% | ±3.0% | ±3.0% | ±3.0% | ±2.0% | ±2.0% | ±2.0% | |||
| SETUP, RISE, HOLD UP TIME | 1000ms, 30ms, 50ms/230VAC 1500ms, 30ms, 15ms/115VAC at full load | |||||||||||
|
INPUT |
VOLTAGE RANGE Note.7 | 85 ~ 264VAC | ||||||||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||||||||
| EFFICIENCY (Typ.) | 81.5% | 84.5% | 85% | 86.5% | 87% | 87% | 88% | 88% | 89% | |||
| AC CURRENT | 0.6A / 115VAC 0.35A / 230VAC | |||||||||||
| INRUSH CURRENT (max.) | Cold start 35A / 115VAC 65A / 230VAC | |||||||||||
| LEAKAGE CURRENT (max.) | 0.75mA / 240VAC | |||||||||||
|
PROTECTION |
OVERLOAD |
110 ~ 150% rated output power | ||||||||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||
|
OVER VOLTAGE |
110 ~ 140% rated output voltage | |||||||||||
| Protection type: Clamp by zener diode | ||||||||||||
|
ENVIRONMENT |
WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) | ||||||||||
| WORKING HUMIDITY | 20% ~ 90% RH non-condensing | |||||||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing | |||||||||||
| TEMP. COEFFICIENT | ±0.03% / ℃ (0 ~ 50℃) | |||||||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||||||||
|
SAFETY & EMC (Note. 9) |
SAFETY STANDARDS Note. 8 | UL62368-1, CSA C22.2 No.62368-1, TUV BS EN/EN62368-1, BSMI CNS 14336-1, CCC GB4943.1, PSE J62368-1, AS/NZS 60950.1，BIS IS13252, KC K60950-1, EAC TP TC 004 approved; SIRIM MS IEC62368-1 (optional) approved | ||||||||||
| WITHSTAND VOLTAGE | I/P-O/P:4242VDC, I/P-FG:2121VDC | |||||||||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | |||||||||||
|
EMC EMISSION |
Parameter | Standard | Test Level / Note | |||||||||
|
Conducted emission |
BS EN/EN55032(CISPR32), FCC PART 15 / CISPR22 CAN ICES-3(B)/NMB-3(B),CNS13438,GB17625.1 EAC TP TC 020,MSIP KN32 |
Class B |
||||||||||
|
Radiated emission |
BS EN/EN55032(CISPR32), FCC PART 15 / CISPR22 CAN ICES-3(B)/NMB-3(B), CNS13438, GB17625.1 EAC TP TC 020, MSIP KN32 |
Class B |
||||||||||
| Harmonic current | BS EN/EN61000-3-2, GB9254 | Class A | ||||||||||
| Voltage flicker | BS EN/EN61000-3-3 | ——- | ||||||||||
|
EMC IMMUNITY |
BS EN/EN55035 | |||||||||||
| Parameter | Standard | Test Level /Note | ||||||||||
| ESD | BS EN/EN61000-4-2 | Level 3, 8KV air; Level 2, 4KV contact | ||||||||||
| RF field susceptibility | BS EN/EN61000-4-3 | Level 2, 3V/m | ||||||||||
| EFT bursts | BS EN/EN61000-4-4 | Level 2, 1KV | ||||||||||
| Surge susceptibility | BS EN/EN61000-4-5 | Level 3, 1KV/Line-Line, 2KV/Line-FG | ||||||||||
| Conducted susceptibility | BS EN/EN61000-4-6 | Level 2, 3V | ||||||||||
| Magnetic field immunity | BS EN/EN61000-4-8 | Level 2, 3A/m | ||||||||||
| Voltage dips, interruption | BS EN/EN61000-4-11 | ＞95% dip 0.5 periods, 30% dip 25 periods,
＞95% interruptions 250 periods |
||||||||||
|
OTHERS |
MTBF | 3879.7K hrs min. Telcordia SR-332 (Bellcore); 674.6K hrs min. MIL-HDBK-217F (25℃) | ||||||||||
| DIMENSION | 93*54*36mm (L*W*H) | |||||||||||
| PACKING | 209g; 60pcs/13.5Kg/1.02CUFT | |||||||||||
|
CONNECTOR |
PLUG | See page 4~5; Other type available by customer requested | ||||||||||
| CABLE | See page 4~5; Other type available by customer requested | |||||||||||
Applications
- Consumer electronic devices
- Telecommunication devices
- Office facilities
- Industrial equipments
