NPF-200 series
November 20, 2022
APC-12E series
February 27, 2023MW Mean Well Meanwell 8W Single Output Switching Power Supply APC-8E series
Features
- Constant current design
- Class Ⅱ power unit, no FG
- Fully isolated plastic case
- IP42 design
- Small and compact size
- Cooling by free air convection
- Protection: Short circuit
- No load power consumption <0.5W
- PF>0.5
- 100% full load burn-in test
- Low cost / High reliability
- 2 years warranty
Mean Well LED Driver APC-8E Series Data Sheet Download
Description
APC-8E series is one 8W AC/DC constant current mode single output LED power supply. It accepts input 180~264VAC and provides four models with different output current, 250mA,350mA, 500mA and 700mA, respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, APC-8E ideally fits the entry-level LED applications.
Mean Well LED Driver APC-8E Series Model Encoding
Specification
| MODEL | APC-8E-250 | APC-8E-350 | APC-8E-500 | APC-8E-700 | |
|
OUTPUT |
RATED CURRENT | 250mA | 350mA | 500mA | 700mA |
| OPERATING VOLTAGE RANGE Note.4 | 16~32V | 11~23V | 8~16V | 6~11V | |
| RATED POWER | 8W | 8.05W | 8W | 7.7W | |
| RIPPLE & NOISE (max.) Note.2 | 350mVp-p | 300mVp-p | 300mVp-p | 250mVp-p | |
| NO LOAD OUTPUT VOLTAGE (max.) | 38V | 29V | 24V | 17V | |
| CURRENT ACCURACY | ±8.0% | ||||
| SETUP, RISE TIME | 500ms, 180ms / 230VAC | ||||
| HOLD UP TIME (Typ.) | 20ms/230VAC at full load | ||||
|
INPUT |
VOLTAGE RANGE Note.3 | 180 ~ 264VAC 254 ~ 370VDC (Note.5) | |||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||
| POWER FACTOR (Typ.) | PF>0.5/230VAC at full load | ||||
| EFFICIENCY(Typ.) | 81.5% | 80.5% | 79% | 77.5% | |
| AC CURRENT | 0.15A/230VAC | ||||
| INRUSH CURRENT(Typ.) | COLD START 70A (twidth=120μs measured at 50% Ipeak) at 230VAC | ||||
| LEAKAGE CURRENT | 0.25mA / 240VAC | ||||
| PROTECTION | SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed. | |||
|
ENVIRONMENT |
WORKING TEMP. | -30 ~ 70℃ (Refer to “Derating Curve”) | |||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | ||||
| TEMP. COEFFICIENT | ±0.2%/℃ (0 ~45℃) | ||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||||
|
SAFETY & EMC |
SAFETY STANDARDS | EAC TP TC 004, BS EN/EN 62368-1 approved; design refer to UL8750, CSA C22.2 No.250.0-08 | |||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | ||||
| ISOLATION RESISTANCE | I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH | ||||
| EMC EMISSION | Compliance to BS EN/EN55032, BS EN/EN61000-3-2, BS EN/EN61000-3-3, EAC TP TC 020 | ||||
| EMC IMMUNITY | Compliance to BS EN/EN55024, BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), EAC TP TC 020 | ||||
|
OTHERS |
MTBF | 13484.2K hrs min. Telcordia SR-332 (Bellcore); 2207.6K hrs min. MIL-HDBK-217F (25℃) | |||
| DIMENSION | 60*30*23.5(L*W*H) | ||||
| PACKING | 0.05Kg; 144pcs/7.6Kg/0.70CUFT | ||||
Applications
Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
