APC-12 series
October 23, 2022APC-25 series
October 23, 2022MW Mean Well Meanwell LED Driver 16W Single Output Switching Power Supply APC-16 series
Features
- Constant current design
- Universal AC input / Full range
- Protections:Short circuit / Over voltage
- Fully isolated plastic case
- Small and compact size
- Cooling by free air convection
- Class Ⅱ power unit, no FG
- Class 2 power unit
- Pass LPS
- IP42 design
- Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
- 100% full load burn-in test
- Low cost / High reliability
- 2 years warranty
Mean Well LED Driver APC-16 Series Data Sheet Download
Description
Mean Well LED driver APC-16 series is one 16W AC/DC constant current mode single output LED power supply. It accepts the full range input 90~264VAC and provides four models with different output current, 350mA(APC-16-350) and 700mA(APC-16-700), respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, APC-16 ideally fits the entry-level LED applications. In this family, there are APC-8 series, APC-12 series, APC-25 series and APC-35 series.
Specification
MODEL | APC-16-350 | APC-16-700 | |
OUTPUT |
RATED CURRENT | 350mA | 700mA |
DC VOLTAGE RANGE | 12~48V | 9~24V | |
RATED POWER | 16.8W | 16.8W | |
RIPPLE & NOISE (max.) Note.2 | 300mVp-p | 250mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±5.0% | ||
CURRENT ACCURACY | ±8.0% | ||
LINE REGULATION | ±1.0% | ||
LOAD REGULATION | ±3.0% | ||
SETUP, RISE TIME | 3000ms, 200ms / 230VAC 3000ms, 200ms / 115VAC at full load | ||
HOLD UP TIME (Typ.) | 20ms/230VAC 12ms/115VAC at full load | ||
INPUT |
VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC | |
FREQUENCY RANGE | 47 ~ 63Hz | ||
EFFICIENCY(Typ.) | 84% | 83% | |
AC CURRENT | 0.3A/230VAC;0.5A/115VAC | ||
INRUSH CURRENT(Typ.) | COLD START 45A (twidth=210μs measured at 50% Ipeak) at 230VAC | ||
MAX. No. of PSUs on 16A CIRCUIT BREAKER | 13 units (circuit breaker of type B) / 23 units (circuit breaker of type C) at 230VAC | ||
LEAKAGE CURRENT | 0.25mA / 240VAC | ||
PROTECTION | OVER VOLTAGE | 50.4~ 60V | 27.6~ 33.5V |
Protection type: Shut off o/p voltage, clamping by zener diode | |||
ENVIRONMENT |
WORKING TEMP. | -30 ~ 70℃ (Refer to “Derating Curve”) | |
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||
STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | ||
TEMP. COEFFICIENT | ±0.2%/℃ (0 ~ 50℃) | ||
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||
SAFETY & EMC
(Note 5) |
SAFETY STANDARDS Note.7 | UL8750, CSA C22.2 No.250.0-08, BIS IS15885, EAC TP TC 004, BS EN/EN 62368-1 approved | |
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | ||
ISOLATION RESISTANCE | I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH | ||
EMC EMISSION | Compliance to BS EN/EN55032, BS EN/EN61000-3-2, BS EN/EN61000-3-3, EAC TP TC 020 | ||
EMC IMMUNITY | Compliance to BS EN/EN55024, BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), EAC TP TC 020 | ||
OTHERS |
MTBF | 6411.4K hrs min. Telcordia SR-332 (Bellcore) ; 1092.9K hrs min. MIL-HDBK-217F (25℃) | |
DIMENSION | 77*40*29(L*W*H) | ||
PACKING | 0.1Kg; 120pcs/14Kg/1.06CUFT |
Application
Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)