100W Constant Current Mode LED Driver HBG-100 series

Features

‧Constant Current mode output

‧Circular metal housing with class Ⅰ design

‧Built-in active PFC function

‧IP67 / IP65 rating for indoor or outdoor installations

‧Function options: output adjustable via potentiometer;

3 in 1 dimming; DALI

‧Typical lifetime>50000 hours

‧5 years warranty

Data Sheet Download

Mean Well 100W Constant Current Mode LED Driver HBG-100 Series

Description

HBG-100 series is a 100W AC/DC LED driver featuring the circular shape design. It operates from 90~305VAC and offers the constant current output models with different rated voltage between 24V and 60V. Thanks to the high efficiency up to 91.5%,with the fanless design, the entire series is able to operate for -40℃ ~ +85℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HBG-100 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

Type	IP Level	Function	Note
Blank	IP67	Io fixed.	In Stock
A	IP65	Io adjustable through built-in potentiometer.	In Stock
B	IP67	3 in 1 dimming function (1~10Vdc, 10V PWM signal and resistance)	In Stock
AB	IP65	Io adjustable through built-in potentiometer with 3 in 1 dimming function	In Stock
DA	IP67	DALI control technology.	In Stock

Specification

MODEL			HBG-100-24		HBG-100-36		HBG-100-48	HBG-100-60
OUTPUT	RATED CURRENT		4A		2.7A		2A	16A
	RATED POWER		96W		97.2W		96W	96W
	CONSTANT CURRENT REGION Note.2		14.4 – 24V		21.6-36V		288 -48V	36- 60V
	OPEN CIRCUITVOLTAGE (max.)		25V		37V		49V	62V
	CURRENT ADJ. RANGE		Adjustable for A/AB-Type (via built-in potentiometer)
			2.4-4A		1.62-2.7A		12-2A	10-1 6A
	CURRENT RIPPLE		5.0% max. @rated current
	CURRENT TOLERANCE		士5.0%
	SETUP TIME	Note.4	2000ms / 115VAC	500ms / 230VAC
INPUT	VOLTAGE RANGE	Note.3	90 – 305VAC 127- 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 – 63Hz
	POWER FACTOR		PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
	TOTAL HARMONIC DISTORTION		THO< 20% (@1oad三60%/115VC,230VAC; @load 75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
	EFFICIENCY (Typ.)	Note.5	90.5%		91%		91%	91.5%
	AC CURRENT (Typ.)		1.1A / 115VAC	0.5A / 230VAC		0.45A/ 277VAC
	INRUSH CURRENT (Typ.)		COLD START 60A (twidth=550µS measured at 50% Ipeak) at 230VAC; Per NEMA410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER		4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT		<O.75mA / 277VAC
	NO LOAD/ STANDBY POWER CONSUMPTION		Standby power consumption <0.5W for 8/AB/DA-Type Blank/A-Type please refer to Note. 7
PROTECTION	OVER CURRENT		95-108%
			Constant current limiting
	OVER VOLTAGE		28- 35V		41 -49V		54- 63V	65- 75V
			Shut down o/p voltage re-power on to recovery
	OVER TEMPERATURE		Shut down o/p voltage re-power on to recovery
ENVIRONMENT	WORKING TEMP.		Tcase=-40 – +85°C (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+85°C
	WORKING HUMIDITY		20 – 95% RH non-condensing
	STORAGE TEMP., HUMIDITY		-40 – +80°C, 10 – 95% RH
	TEMP. COEFFICIENT		士0 03%/°C (0 – 50°C)
	VIBRATION		10- 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS		UL8750(type”HL”), CSA C22.2 No.250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; GB19510.1, GB19510.14, BIS IS15885(/o「 36A,48A,60A only), EAC TP TC 004,IP65 or IP67 approved
	DALI STANDARDS		Compliance to IEC62386-101, 102, 207 for DA-Type only
	WITHSTAND VOLTAGE		I/P-0 /P:3. 75KVAC	I/P-FG:2KVAC		O/P-FG:0.5KVAC
	ISOLATION RESISTANCE		I/P-0 /P, 1/P-FG, 0 /P-FG:1QOM Ohms / 500VDC / 25°C/ 70% RH
	EMC EMISSION	Note.7	Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load≥60%); BS EN/EN61000-3-3, GB17743 and GB17625.1, EAC TP TC 020
	EMC IMMUNITY		Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level (surge immunity: Line-Earth:4KV, Line-Line:2KV,) EAC TP TC 020
OTHERS	MTBF		985.6K hrs min. Telcordia SR-332 (Bellcore); 300Kh「s min. MIL-HDBK-217F (25°C)
	DIMENSION		心130mm66.5mm (D H)
	PACKING		1.18Kg; 12pcs/15.7Kg/1.43CUFT (Blank /A/B Type),1.89CUFT (E Type)

Application

‧LED bay lighting

‧LED stage lighting

‧LED spot lighting

‧Type “HL” for use in Class I, Division 2 hazardous (Classified) location.

Video Show

Find us on SNS

You can find us and know more about us on SNS: