NPF-90 series
November 20, 2022
NPF-120 series
November 20, 2022MW Mean Well Meanwell 120W Single Output LED Driver NPF-120D series
Features
- Plastic housing with class II design
- Built-in active PFC function
- Standby power consumption <0.5W
- IP67 rating for indoor or outdoor installations
- Function options: 3 in 1 dimming (dim-to-off)
- Typical lifetime >50000hours
- 5 years warranty
Mean Well LED Driver NPF-120D Series Data Sheet Download
Description
NPF-120D series is a 120W AC/DC LED driver featuring the constant current mode output. NPF-120D operates from 90~305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -40℃~+90℃ case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations. NPF-120D is equipped with the 3 in 1 dimming function so as to provide the design flexibility for LED lighting system.
In NPF family, there are NPF-40D series, NPF-40 series, NPF-60D series, NPF-60 series, NPF-90D series, NPF-90 series, NPF-120D series, NPF-120 series and NPF-200 series.
Mean Well LED Driver NPF-120D Series Model Encoding
| Type | IP Level | Function | Note |
| Blank | IP67 | 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) | In Stock |
| BE | IP67 | 3 in 1 dimming function and Auxiliary DC output | By request |
Specification
| MODEL | NPF-120D-12 | NPF-120D-15 | NPF-120D-20 | NPF-120D-24 | NPF-120D-30 | NPF-120D-36 | NPF-120D-42 | NPF-120D-48 | NPF-120D-54 | ||
|
OUTPUT |
RATED CURRENT | 10A | 8A | 6A | 5A | 4A | 3.4A | 2.9A | 2.5A | 2.3A | |
| RATED POWER | 120W | 120W | 120W | 120W | 120W | 122.4W | 121.8W | 120W | 124.2W | ||
| CONSTANT CURRENT REGION | 7.2 ~ 12V | 9 ~ 15V | 12 ~ 20V | 14.4 ~ 24V | 18 ~ 30V | 21.6 ~ 36V | 25.2 ~ 42V | 28.8 ~ 48V | 32.4 ~ 54V | ||
| CURRENT RIPPLE | 5.0% max. @rated current | ||||||||||
| CURRENT TOLERANCE | ±5.0% | ||||||||||
| AUXILIARY DC OUTPUT
Note.4 |
Nominal 12V (deviation 11.4~12.6V) @0.2A for BE-Type only | ||||||||||
| SET UP TIME Note.3 | 500ms/115VAC, 230VAC | ||||||||||
|
INPUT |
VOLTAGE RANGE Note.2 | 90 ~ 305VAC 127 ~ 431VDC
(Please refer to “STATIC CHARACTERISTIC” section) |
|||||||||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||||||||
| POWER FACTOR (Typ.) | PF≧0.97/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC@full load
(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section) |
||||||||||
| TOTAL HARMONIC DISTORTION | THD< 20% (@load≧60%/115VC, 230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) |
||||||||||
| EFFICIENCY
(Typ.) |
BLANK-TYPE | 88.5% | 88.5% | 89% | 89.5% | 89% | 89.5% | 89.5% | 90% | 90% | |
| BE-TYPE(Note.5) | 87.5% | 87.5% | 88.5% | 89% | 88.5% | 89% | 89% | 89% | 89% | ||
| AC CURRENT (Typ.) | 1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC | ||||||||||
| INRUSH CURRENT(Typ.) | COLD START60A (twidth=520μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | ||||||||||
| MAX. NO. of PSUs on 16A CIRCUIT BREAKER | 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | ||||||||||
| LEAKAGE CURRENT | <0.25mA / 277VAC | ||||||||||
| STANDBY POWER CONSUMPTION | <0.5W | ||||||||||
|
PROTECTION |
OVER CURRENT | 95 ~ 108% | |||||||||
| Constant current limiting, recovers automatically after fault condition is removed | |||||||||||
| SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed | ||||||||||
|
OVER VOLTAGE |
15 ~ 17V | 17.5 ~ 21V | 23 ~ 27V | 28 ~ 34V | 34 ~ 40V | 41 ~ 46V | 46 ~ 54V | 54 ~ 60V | 59 ~ 66V | ||
| Shut down o/p voltage, re-power on to recover | |||||||||||
| OVER TEMPERATURE | Shut down o/p voltage, re-power on to recover | ||||||||||
|
ENVIRONMENT |
WORKING TEMP. | Tcase=-40 ~ +90℃ (Please refer to “OUTPUT LOAD vs TEMPERATURE” section) | |||||||||
| MAX. CASE TEMP. | Tcase=+90℃ | ||||||||||
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||||||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH | ||||||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 40℃) | ||||||||||
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||||||||
|
SAFETY & EMC |
SAFETY STANDARDS | UL8750(type”HL”), CSA C22.2 No. 250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384
independent,EAC TP TC 004, GB19510.1,GB19510.14,IP67 approved; Design refer to BS EN/EN60335-1 |
|||||||||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | ||||||||||
| ISOLATION RESISTANCE | I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH | ||||||||||
| EMC EMISSION | Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧60%); BS EN/EN61000-3-3; GB17743 and GB17625.1, EAC TP TC 020 | ||||||||||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Line 2KV); EAC TP TC 020 | ||||||||||
|
OTHERS |
MTBF | 2632.6K hrs min. Telcordia SR-332 (Bellcore); 233.9K hrs min. MIL-HDBK-217F (25℃) | |||||||||
| DIMENSION | 191*63*37.5mm (L*W*H) | ||||||||||
| PACKING | 0.97Kg; 15pcs/15.6Kg/0.87CUFT | ||||||||||
Applications
- LED panel lighting
- LED downlight
- LED decorative lighting
- Moving sign
- Type “HL” for use in Class I, Division 2 hazardous (Classified) location
