MW Mean Well Meanwell 240W Constant Power Mode LED Driver XBG-240 series

Features

‧Full power output at 70~100% constant power mode operation

‧Wide input range 100 ~ 305VAC with active PFC function

‧Metal housing design with IP67

Multiple dimming functions:3 in 1. (0-10V/PWM/Resistor)

‧Surge protection with 6kV /4kV

‧Dimming circuit with Isolated for latest safety regulation

‧Typical lifetime>50000 hours and 5 years warranty

‧AC input cable with connector for flexible Installtion

Mean Well LED Driver XBG-240 Series Data Sheet Download

240W Constant Power LED Driver XBG-240 Series

Description

XBG-240 series is a 240W AC/DC LED driver featuring the constant power mode. XBG-240 operates from 100~305VAC and offers with different rated current ranging between 4000mA and 5700mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40℃~+90℃ case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover, the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XBG-240 series comply with the latest version of IEC61347/IEC60598-1 and UL8750 international safety regulations.The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both users and luminaire system during installation.

In Mean Well LED driver XBG family, there are XBG-100 series, XBG-160 series and XBG-240 series.

Mean Well LED Driver XBG-240 Series Model Encoding

xbg-240_model_encoding — XBG-240 Model Encoding

Type

P Level

Function

Note

A

P67

constant power adjustable via built-in potentiometer

in Stock

AB

P67

constant power adjustable via built-in potentiometer +

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistor)

in Stock

Specification

MODEL			XBG-240- –
OUTPUT	DEFAULT CURRENT		4900mA
	RATED POWER		240W
	CONSTANT CURRENT REGION		30 ~60V
	FULL POWER CURRENT RANGE		4000~5700mA
	OPEN CIRCUIT VOLTAGE (max.)		65V
	CURRENT ADJ. RANGE		2000~5700mA
	CURRENT RIPPLE		4.0% max. @rated current
	CURRENT TOLERANCE		±5%
	SET UP TIME	Note.4	500ms/230VAC, 1200ms/115VAC
INPUT	VOLTAGE RANGE	Note.2	100 ~ 305VAC 142~431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR (Typ.)		PF≧0.97 / 115VAC, PF≧0.95 / 230VAC, PF≧0.92 / 277VAC at full load (Please refer to “Power Factor Characteristic” section)
	TOTAL HARMONIC DISTORTION		THD< 10% (@ load≧50% at 115VAC/230VAC ,@load≧75% at 277VAC) Please refer to “TOTAL HARMONIC DISTORTION (THD)” section
	EFFICIENCY (Typ.)		93%
	AC CURRENT (Typ.)		3.2A / 115VAC 1.3A / 230VAC 1.2A / 277VAC
	INRUSH CURRENT(Typ.)		COLD START 65A (twidth=600μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. NO. of PSUs on 16A CIRCUIT BREAKER		3 unit (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT		<0.75mA / 277VAC
	STANDBY POWER CONSUMPTION		Standby power consumption<0.5W for AB-Type
PROTECTION	SHORT CIRCUIT		Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE		66 ~ 78V
			Shut down output voltage, re-power on to recover
	OVER TEMPERATURE		Shut down output voltage, re-power on to recovery
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +85℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+85℃
	WORKING HUMIDITY		20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY		-40 ~ +80℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT		±0.03%/℃ (0 ~ 60℃)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS		UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; IS15885(Part2/Sec13); GB19510.1,GB19510.14; IP67;EAC TP TC 004 approved
	WITHSTAND VOLTAGE		I/P-O/P:3.75KVAC I/P-PE:2KVAC O/P-PE:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-PE, O/P-PE:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION		Parameter		Standard		Test Level/Note
			Conducted		BS EN/EN55015(CISPR15),GB/T17743		—–
			Radiated		BS EN/EN55015(CISPR15),GB/T17743		—–
			Harmonic Current		BS EN/EN61000-3-2,GB17625.1		Class C @load≥50%
			Voltage Flicker		BS EN/EN61000-3-3		—–
	EMC IMMUNITY		BS EN/EN61547
			Parameter		Standard		Test Level/Note
			ESD		BS EN/EN61000-4-2		Level 3, 8KV air; Level 2, 4KV contact
			Radiated		BS EN/EN61000-4-3		Level 3
			EFT/Burst		BS EN/EN61000-4-4		Level 3
			Surge		BS EN/EN61000-4-5		4KV/Line-Line 6KV/Line-Earth
			Conducted		BS EN/EN61000-4-6		Level 3
			Magnetic Field		BS EN/EN61000-4-8		Level 4
			Voltage Dips and Interruptions		BS EN/EN61000-4-11		>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF		615.83K hrs min.	Telcordia SR-332(Bellcore); 154.57K hrs min.		MIL-HDBK-217F (25℃)
	LIFETIME	Note.5	50000 hrs min.
	DIMENSION		φ176mm 65mm(DH)
	PACKING		1.92Kg; 8pcs/17.5Kg/1.47CUFT

Application

LED bay lighting
LED stage lighting
LED spot lighting
Explosion-proof lighting
Type HL LED driver for classⅠ division 2.

Mean Well LED Driver XBG-240 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: