MW Mean Well Meanwell 50W Constant Power Mode LED Driver XLG-50 series

Features

‧Constant Power mode output

‧Metal housing design with functional Ground

‧Built-in active PFC function

‧Class 2 power unit

‧No load / Standby power consumption <0.5W

‧IP67 rating for indoor or outdoor installations

‧Function options: output adjustable via potentiometer

3 in 1 dimming function (Dim to off and Isolation design)

‧Typical lifetime>50000 hours

‧5 years warranty

Mean Well LED Driver XLG-50 Series Data Sheet Download

Mean Well 50W constant power mode led driver XLG-50 series

Description

XLG-50 series is a 50W AC/DC LED driver featuring the constant power mode output. XLG-50 operates from 90~305VAC. Thanks to the high efficiency up to 90%, The entire series is able to operate between -40℃~90℃ wide case temperature range with air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications.XLG-50 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.XLG-50 series comply with the latest version of IEC61347/GB7000.1-2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both user and luminaire system during installation.

In XLG family, there are XLG-20 series, XLG-25 series, XLG-50 series, XLG-75 series, XLG-100 series, XLG-150 series, XLG-200 series, XLG-240 series and XLG-320 series.

Mean Well LED Driver XLG-50 Series Model Encoding

xlg-50_model_encoding — XLG-50 Model Encoding

Type

IP Level

Function

Note

A

IP67

Io adjustable through built in potentiometer.

In Stock

AB

IP67

Io adjustable through built in potentiometer

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)

In Stock

Note: India version needs MOQ for production, please consult MEAN WELL for detail.

Specification

MODEL			XLG-50 –
OUTPUT	RATED CURRENT		1A
	CONSTANT CURRENT REGION Note.2		22 ~54V
	RATED POWER		100VAC ~ 305VAC
			50W
	CURRENT RIPPLE		5.0% max. @rated current
	OPEN CIRCUIT VOLTAGE (max.)		57V
	CURRENT ADJ. RANGE		0.53 ~ 2.1A
	SETUP, RISE TIME Note.3		500ms, 100ms/115VAC, 230VAC
INPUT	VOLTAGE RANGE	Note.4	90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR		PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
	TOTAL HARMONIC DISTORTION		THD< 10%(@load≧50%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
	EFFICIENCY (Typ.)	Note.10	90%
	AC CURRENT		0.57A / 115VAC 0.29A / 230VAC 0.24A/277VAC
	INRUSH CURRENT(Typ.)		COLD START 50A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER		5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT		<0.75mA / 277VAC
	NO LOAD / STANDBY POWER CONSUMPTION		No load power consumption <0.5W for A, <0.75W for I series Standby power consumption <0.5W for AB-Type(Dimming OFF)
PROTECTION	OVER POWER		110-150% Over Power Protection, recovers automatically after fault condition is removed
	SHORT CIRCUIT		Constant current limiting, recovers automatically after fault condition is removed
	OVER TEMPERATURE		Hiccup mode, recovers automatically after fault condition is removed
	INPUT OVER VOLTAGE Note.8		320 ~ 370VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed)
			Can survive input voltage stress of 440Vac for 48 hours @ tc 75℃ max
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
	MAX. CASE TEMP.		Tcase=+90℃
	WORKING HUMIDITY		20 ~ 95%
	STORAGE TEMP.		-40 ~ +80℃
	TEMP. COEFFICIENT		±0.03%/℃ (0 ~ 60℃)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS Note.8		UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC AS/NZS IEC BS EN/EN61347-1, AS/NZS BS EN/EN61347-2-13 independent, BS EN/EN62384; IP67; GB19510.1, GB19510.14, EAC TP TC 004,J61347-1(H29), J61347-2-13(H29),KC61347-1,KC61347-2-13, IS15885(Part2/Sec13)( for XLG-50I type only); NOM-058-SCFI-2017 approved
	WITHSTAND VOLTAGE		I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION		Parameter	Standard		Test Level/Note
			Conducted	BS EN/EN55015(CISPR15) ,GB/T17743		—–
			Radiated	BS EN/EN55015(CISPR15) ,GB/T17743		—–
			Harmonic Current	BS EN/EN61000-3-2 ,GB/T17625.1		Class C @load≥50%
			Voltage Flicker	BS EN/EN61000-3-3		—–
	EMC IMMUNITY		BS EN/EN61547
			Parameter	Standard		Test Level/Note
			ESD	BS EN/EN61000-4-2		Level 3, 8KV air ; Level 2, 4KV contact
			Radiated	BS EN/EN61000-4-3		Level 3
			EFT/Burst	BS EN/EN61000-4-4		Level 3
			Surge	BS EN/EN61000-4-5		4KV/Line-Line 6KV/Line-Earth
			Conducted	BS EN/EN61000-4-6		Level 3
			Magnetic Field	BS EN/EN61000-4-8		Level 4
			Voltage Dips and Interruptions	BS EN/EN61000-4-11		>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF		1252.69 K hrs min. Telcordia SR-332 (Bellcore) 394.57Khrs min.		MIL-HDBK-217F (25℃)
	DIMENSION		1056330mm (LWH)
	PACKING		0.41Kg;24pcs/ 10.5Kg/0.68CUFT for A-type 0.42Kg;24pcs/ 11Kg/0.68CUFT for AB-type

Application

LED street lighting
LED architectural lighting
LED bay lighting
LED floodlighting
Type “HL” for use in Class I, Division 2
hazardous (Classified) location.

Packing Information

Net Weight	0.41kg/PCS, 9.84kg/carton
Gross weight	10.50kg/carton
Quantity	24PCS/ carton
Carton Size	37cm(L)34cm(W)20cm(H)

Mean Well LED Driver XLG-50 Series Video Show

*The model No. of the Mean Well XLG LED driver in this video is XLG-50-A.

Find us on SNS

You can find us and know more about us on SNS:

XLG-50 series

XLG-25 series

XLG-75 series