MW Mean Well Meanwell 60W Reliable Railway DC-DC Converter RSD-60 Series

Features

Compliance to BS EN/EN50155 and BS EN/EN45545-2 railway standard
Ultra-compact and 1U low profile(25mm)
4:1 wide input range
No minimum load required
Protections: Short circuit / Overload / Over voltage / Input reverse polarity
4000VDC I/O isolation (reinforced isolation)
Half encapsulated, cooling by free air convection
-40~+70℃ wide working temperature
Built-in constant current limiting circuit
LED indicator for power on
3 years warranty

Mean Well DC-DC Converter RSD-60 Series Data Sheet Download

Mean Well 60W Reliable Railway DC-DC Converter RSD-60 Series

Description

RSD-60 is a 60W enclosed type DC-DC reliable railway converter. This series is compliant with BS EN/EN50155/ IEC60571 railway standard, constituting three types of models with 4:1 wide but different input ranges 9~36V/18~72V/40~160V, suitable for railway and all kinds of transportation systems exploiting the frequently used standard input voltages such as 12V, 24V, 36V, 48V, 72V, 96V and 110V. Various output voltages, 3.3V, 5V, 12V and 24V are available for selection.

This series has the capability of working under -40~+70℃, low ripple and noise, supreme EMC characteristics, 4KVDC I/P-OP, low enclosure profile 25mm and an interior with semi-potted silicone. It does not only well fit the in-car systems or the facilities by rails for railway, trams and buses but also can be used in the harsh environment with high vibration, high dust, extremely low or high temperature, etc.

Mean Well DC-DC Converter RSD-60 Series Model Encoding

Specification

MODEL		RSD-60G-3.3	RSD-60G-5	RSD-60G-12		RSD-60G-24	RSD-60L-3.3	RSD-60L-5		RSD-60L-12	RSD-60L-24
OUTPUT	DC VOLTAGE	3.3V	5V	12V		24V	3.3V	5V		12V	24V
	RATED CURRENT	12A	12A	5A		2.5A	12A	12A		5A	2.5A
	CURRENT RANGE	0 ~ 12A	0 ~ 12A	0 ~ 5A		0 ~ 2.5A	0 ~ 12A	0 ~ 12A		0 ~ 5A	0 ~ 2.5A
	RATED POWER	39.6W	60W	60W		60W	39.6W	60W		60W	60W
	RIPPLE & NOISE (max.) Note.2	60mVp-p	100mVp-p	50mVp-p		50mVp-p	60mVp-p	60mVp-p		50mVp-p	50mVp-p
	VOLTAGE TOLERANCE Note.3	±2.0%	±2.0%	±2.0%		±2.0%	±2.0%	±2.0%		±2.0%	±2.0%
	LINE REGULATION	±0.5%	±0.5%	±0.3%		±0.2%	±0.5%	±0.5%		±0.3%	±0.2%
	LOAD REGULATION	±0.5%	±0.5%	±0.3%		±0.2%	±0.5%	±0.5%		±0.3%	±0.2%
	SETUP, RISE TIME	100ms, 60ms at full load
	HOLD UP TIME (Typ.)	Please refer to page 5 Hold up Time (Load de-rating curve)
INPUT	VOLTAGE RANGE CONTINUOUS	9 ~ 36VDC					18 ~ 72VDC
	EFFICIENCY (Typ.)	86.5%	88%	92%		90%	88.5%	89%		93%	91.5%
	DC CURRENT (Typ.)	2.1A/24VDC	3A/24VDC				0.95A/48VDC	1.5A/48VDC
	INRUSH CURRENT (Typ.)	20A/24VDC					20A/48VDC
	INTERRUPTION OF VOLTAGE SUPPLY	EN50155:2007-G type complies with S1 level(3ms) @full load, S2 level(10ms) @50% load; L type comply with S2 level(10ms) @full load
		EN50155:2017-Comply with S1 level
PROTECTION	OVERLOAD	105 ~ 135% rated output power
		Protection type: Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	4.3 ~ 5.3V	5.75 ~ 7V	13.8 ~ 16.2V		27.6 ~ 32.4V	4.3 ~ 4.95V	5.75 ~ 7V		13.8 ~ 16.2V	27.6 ~ 32.4V
		Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-40 ~ +55℃ (no derating); +70℃ @ 60% load by free air convection; +70℃ (no derating with external base plate)
	WORKING HUMIDITY	5 ~ 95% RH non-condensing
	STORAGE TEMP.	-40 ~ +85℃
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: compliance to IEC61373
	OPERATING ALTITUDE	5000 meters
SAFETY & EMC (Note 4)	SAFETY STANDARDS	IEC 62368-1, UL 62368-1, AS/NZS 62368-1, EAC TP TC 004 approved, Design refers to BS EN/EN62368-1
	WITHSTAND VOLTAGE	I/P-O/P:4KVDC I/P-FG:2.5KVDC O/P-FG:2.5KVDC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Parameter			Standard				Test Level / Note
		Conducted			BS EN/EN55032				Class A
		Radiated			BS EN/EN55032				Class B
		Harmonic Current			BS EN/EN61000-3-2				—–
		Voltage Flicker			BS EN/EN61000-3-3				—–
	EMC IMMUNITY	BS EN/EN55035
		Parameter			Standard				Test Level / Note
		ESD			BS EN/EN61000-4-2				Level 3, ±8KV air; Level 3, ±6KV contact
		Radiated Field			BS EN/EN61000-4-3				Level X, 20V/m
		EFT / Burst			BS EN/EN61000-4-4				Level 3, 2KV at power
									Level 4, 2KV at signal
		Surge			BS EN/EN61000-4-5				Level 3,1KV Line-Line, Level 3, 2KV Line-Earth
		Conducted			BS EN/EN61000-4-6				Level 3
	RAILWAY STANDARD	Compliance to BS EN/EN45545-2 for fire protection; BS EN/EN50155 / IEC60571 including IEC61373 for shock & vibration, BS EN/EN50121-3-2 for EMC
OTHERS	MTBF	2738.8K hrs min. Telcordia SR-332 (Bellcore); 593.9K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	1286025mm (LWH)
	PACKING	0.29Kg; 48pcs/14.9Kg/0.75CUFT

Applications

Bus, tram, metro or railway system
Highly vibrating, highly dusty, extremely low or high temperature harsh environment
Wireless network
Telecom or datacom system
Industry control system

Mean Well DC-DC Converter RSD-60 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: