EPP-200 series
March 6, 2023
EPP-400 series
March 6, 2023MW Mean Well Meanwell 300W Single Output with PFC Function Power Supply EPP-300 Series
Features
- Universal AC input / Full range
- Built-in active PFC function
- High efficiency up to 93%
- Withstand 300VAC surge input for 5 seconds
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Built-in 12V/0.5A auxiliary output
- 5″x3″ compact size
- Free air convection for 200W and 300W with 20.5CFM forced air
- With power good and fail signal output
- Built-in remote sense function
- No load power consumption under 0.5W by PS-ON control
- Standby 5V@1A with fan, @ 0.6A without fan
- Operating altitude up to 5000 meters
- 3 years warranty
Mean Well Power Supply EPP-300 Series Data Sheet Download
Specification
| MODEL | EPP-300-12 | EPP-300-15 | EPP-300-24 | EPP-300-27 | EPP-300-48 | |
|
OUTPUT |
DC VOLTAGE | 12V | 15V | 24V | 27V | 48V |
| RATED CURRENT (20.5CFM) | 25A | 20A | 12.5A | 11.12A | 6.25A | |
| CURRENT RANGE (convection) | 0 ~ 16.67A | 0 ~ 13.33A | 0 ~ 8.33A | 0 ~ 7.4A | 0 ~ 4.17A | |
| CURRENT RANGE (20.5CFM) | 0 ~ 25A | 0 ~ 20A | 0 ~ 12.5A | 0 ~ 11.12A | 0 ~ 6.25A | |
| RATED POWER (convection) | 200W | 200W | 199.9W | 199.8W | 200.2W | |
| RATED POWER (20.5CFM) | 300W | 300W | 300W | 300.24W | 300W | |
| RIPPLE & NOISE (max.) Note.2 | 120mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | 250mVp-p | |
| VOLTAGE ADJ. RANGE | Main output:11.4 ~ 12.6V | Main output:14.25 ~ 15.75V | Main output:22.8 ~ 25.2V | Main output:25.65 ~ 28.35V | Main output:45.6 ~ 50.4V | |
| VOLTAGE TOLERANCE Note.3 | ±3.0% | ±3.0% | ±2.0% | ±2.0% | ±2.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| SETUP, RISE TIME | 2500ms, 30ms/230VAC 3000ms, 30ms/115VAC at full load | |||||
| HOLD UP TIME (Typ.) | 13ms/230VAC/115VAC at full load | |||||
|
INPUT |
VOLTAGE RANGE Note.5 | 90 ~ 264VAC 127 ~ 370VDC | ||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||
| POWER FACTOR (Typ.) | PF>0.93/230VAC PF>0.98/115VAC at full load | |||||
| EFFICIENCY (Typ.) | 90% | 90% | 92.5% | 93% | 93% | |
| AC CURRENT (Typ.) | 3.5A/115VAC 1.8A/230VAC | |||||
| INRUSH CURRENT (Typ.) | COLD START 40A/115VAC 80A/230VAC | |||||
| LEAKAGE CURRENT | <2mA/240VAC | |||||
|
PROTECTION |
OVERLOAD | 105 ~ 135% rated output power | ||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||
| OVER VOLTAGE | 13.5 ~ 15V | 16.2 ~ 18.5V | 26 ~ 30V | 29.5 ~ 33.5V | 52 ~ 59.5V | |
| Protection type: Shut down o/p voltage, re-power on to recover | ||||||
|
OVER TEMPERATURE |
115℃±5℃ (TSW1) detect on heatsink of power transistor | |||||
| 115±5℃ (12V,15V),100±5℃ (24V,27V,48V) (TSW2) detect on heatsink of output diode | ||||||
| Protection type: (TSW1) Shut down o/p voltage, recovers automatically after temperature goes down | ||||||
| Protection type: (TSW2) Shut down o/p voltage, re-power on to recover | ||||||
|
FUNCTION |
5V STANDBY | 5VSB: [email protected] without fan, 1A with fan 20.5CFM; tolerance ± 2%, ripple: 150mVp-p(max.) | ||||
| AUXILIARY POWER (AUX) | [email protected] for driving a fan; tolerance -15% ~ +10% at main output 20% rated current (20.5CFM) | |||||
| PS-ON INPUT SIGNAL | Power on: PS-ON = “Hi” or ” > 2 ~ 5V”; Power off: PS-ON = “Low” or ” < 0 ~ 0.5V” | |||||
| POWER GOOD / POWER FAIL | 500ms>PG>10ms; The TTL signal goes high with 10ms to 500ms delay after power set up; The TTL signal goes low at least 1ms before Vo below 90% of rated value | |||||
|
ENVIRONMENT |
WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) | ||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH | |||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | |||||
| OPERATING ALTITUDE Note.7 | 5000 meters | |||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||||
|
SAFETY & EMC (Note 4) |
SAFETY STANDARDS | UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved | ||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | |||||
| EMC EMISSION | Compliance to BS EN/EN55032 (CISPR32), Conduction Class B, Radiation Class B; BS EN/EN61000-3-2,3; EAC TP TC 020 | |||||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN60601-1-2, EAC TP TC 020 | |||||
|
OTHERS |
MTBF | 1490.1K hrs min. Telcordia SR-332 (Bellcore); 160.3K hrs min. MIL-HDBK-217F (25℃) | ||||
| DIMENSION | 127*76.2*35mm (L*W*H) | |||||
| PACKING | 0.37 Kg; 36pcs/14.3Kg/0.96CUFT; | |||||
Applications
- Industrial automation machinery
- Industrial control system
- Mechanical and electrical equipment
- Electronic instruments, equipments or apparatus
Packing Information
| Net Weight | 0.37kg/PCS, 13.32kg/carton |
| Gross weight | 15.46kg/carton |
| Quantity | 36PCS/ carton |
| Carton Size | 44.5cm(L)*29.5cm(W)*20.5cm(H) |
