EPP-400 series
March 6, 2023MW Mean Well Meanwell 500W Single Output with PFC Function Power Supply EPP-500 Series
Features
- 5″x3″ compact size
- 320W convection, 500W force air
- 550W peak power (3sec.)
- EMI for both Class I & Class II configuration
- -30~+70℃ wide range operating temperature
- No load power consumption<0.5W by PS_ON control
- High efficiency up to 94%
- Protections: Short circuit / Overload / Over voltage / Over temperature
- 5Vdc standby output, 12Vdc fan supply, Power Good, Power Fail and remote sense
- Operating altitude up to 5000 meters
- LED indicator for power on
- 3 years warranty
Mean Well Power Supply EPP-500 Series Data Sheet Download
Description
EPP-500 is a 500W highly reliable green PCB type power supply with a high power density on the 5 by 3 footprint. It accepts 80~264VAC input and offers various output voltages between 12V and 54V. The working efficiency is up to 94% and the extremely low no load power consumption is down below 0.5W. EPP-500 is able to be used for both ClassⅠ(with FG) and Class Ⅱ (no FG) system design. EPP-500 has complete protection functions; it is complied with the international safety regulations such as TUV BS EN/EN62368-1,TUV BS EN/EN60335-1,UL62368-1 and IEC62368-1. EPP-500 series serves as a high price-to-performance power supply solution for various industrial applications.
In Mean Well open frame green PCB type, there are EPS-15, EPS-25, EPS-35, EPS-45S, EPS-65S, EPP-120S, EPS-45, EPS-65, EPS-120, EPP-100, EPP-150, EPP-200, EPP-300, EPP-400, EPP-500 and ELP-75.
Mean Well Power Supply EPP-500 Series Model Encoding
Specification
| MODEL | EPP-500-12 | EPP-500-15 | EPP-500-18 | EPP-500-24 | EPP-500-27 | EPP-500-36 | EPP-500-48 | EPP-500-54 | ||||||
| OUTPUT | DC VOLTAGE | 12V | 15V | 18V | 24V | 27V | 36V | 48V | 54V | |||||
| CURRENT | 25CFM | 41.6A | 33.3A | 27.8A | 20.8A | 18.5A | 13.9A | 10.4A | 9.26A | |||||
| Convection | 26.7A | 21.3A | 17.8A | 13.4A | 11.9A | 8.9A | 6.7A | 5.93A | ||||||
| RATED
POWER Note.5 |
25CFM | 499.2W | 499.5W | 500.4W | 499.2W | 499.5W | 500.4W | 499.2W | 500W | |||||
| Convection | 320.4W | 319.5W | 320.4W | 321W | 321.3W | 320.4W | 321.6W | 320.2W | ||||||
| PEAK POWER(3sec.) | 550W | |||||||||||||
| RIPPLE & NOISE (max.) Note.2 | 200mVp-p | 200mVp-p | 200mVp-p | 200mVp-p | 200mVp-p | 200mVp-p | 200mVp-p | 200mVp-p | ||||||
| VOLTAGE ADJ. RANGE(MAIN OUTPUT) | 11.4〜12.6V | 14.3〜15.8V | 17.1〜18.9V | 22.8~25.2V | 25.6 ~ 28.4V | 34.2 ~37.8V | 45.6 ~50.4V | 51 ~56V | ||||||
| VOLTAGE TOLERANCE Note.3 | ±3.0% | ±3.0% | ±3.0% | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ||||||
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||||||
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ||||||
| SETUP, RISE TIME | 1000ms, 30ms/230VAC 1500ms, 30ms/115VAC at full load | |||||||||||||
| HOLD UP TIME (Typ.) | 10ms/230VAC 10ms/115VAC at full load | |||||||||||||
| INPUT | VOLTAGE RANGE Note.4 | 80 ~ 264VAC 113 ~ 370VDC | ||||||||||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||||||||||
| POWER FACTOR | PF>0.94/230VAC PF>0.98/115VAC at full load | |||||||||||||
| EFFICIENCY (Typ.) | 91% | 92% | 92.5% | 93% | 93.5% | 94% | 94% | 94% | ||||||
| AC CURRENT (Typ.) | 5.8A/115VAC 2.9A/230VAC | |||||||||||||
| INRUSH CURRENT (Typ.) | COLD START 40A/115VAC 80A/230VAC | |||||||||||||
| LEAKAGE CURRENT | <0.75mA / 240VAC | |||||||||||||
| PROTECTION | OVERLOAD | 105 ~ 135% rated output power | ||||||||||||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||||
| OVER VOLTAGE | 13.2 ~ 15.6V | 16.5 ~ 19.5V | 19.8 ~23.4V | 26.4 ~ 31.2V | 29.7 ~ 35.1V | 39.6 ~ 46.8V | 52.8 ~ 62.4V | 56.7~59.4V | ||||||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||||
| OVER TEMPERATURE | Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | |||||||||||||
| FUNCTION | 5V STANDBY | 5Vsb : [email protected] without fan, 1A with fan 25CFM ; tolerance ±2%, ripple : 120mVp-p(max.) | ||||||||||||
| 12V FAN SUPPLY | [email protected] for driving a fan ;
tolerance -15% ~+10% at main output 20% rated current (25CFM) |
|||||||||||||
| PS-ON INPUT SIGNAL | Power on: PS-ON = “Hi” or ” > 2 ~ 5V”;
Power off: PS-ON = “Low” or ” < 0 ~ 0.5 V” |
|||||||||||||
| POWER GOOD / POWER FAIL | 500ms>PG>10ms ; The TTL signal goes high with 10ms to 500ms delay after power set up ; The TTL signal goes low at least 1ms before Vo below 90% of rated value | |||||||||||||
| ENVIRONMENT | WORKING TEMP. | -30 ~ +70℃ (Refer to “Derating Curve”) | ||||||||||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||||||||||
| STORAGE TEMP. | -40 ~ +85℃ | |||||||||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 〜50℃) | |||||||||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||||||||||||
| OPERATING ALTITUDE Note.5 | 5000 meters | |||||||||||||
| SAFETY & EMC (Note 6) | SAFETY STANDARDS | UL62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, IEC62368-1, EAC TP TC 004 approved | ||||||||||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||||||||||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | |||||||||||||
| EMC EMISSION | Parameter | Standard | Test Level / Note | |||||||||||
| Conducted | BS EN/EN55032(CISPR32), CNS13438 | Class I : Class B , Class II: Class A | ||||||||||||
| Radiated | BS EN/EN55032(CISPR32), CNS13438 | Class A | ||||||||||||
| Harmonic Current | BS EN/EN61000-3-2 | Class A | ||||||||||||
| Voltage Flicker | BS EN/EN61000-3-3 | |||||||||||||
| EMC IMMUNITY | BS EN/EN55024, BS EN/EN61000-6-2 | |||||||||||||
| Parameter | Standard | Test Level /Note | ||||||||||||
| ESD | BS EN/EN61000-4-2 | Level 3, 8KV air; Level 2, 4KV contact, criteria A | ||||||||||||
| Radiated Susceptibility | BS EN/EN61000-4-3 | Level 3, criteria A | ||||||||||||
| EFT/Burest | BS EN/EN61000-4-4 | Level 3, criteria A | ||||||||||||
| Surge | BS EN/EN61000-4-5 | Level 4,2KV/L-N, criteria A | ||||||||||||
| Conducted | BS EN/EN61000-4-6 | Level 3, criteria A | ||||||||||||
| Magnetic Field | BS EN/EN61000-4-8 | Level 4, criteria A | ||||||||||||
| Voltage Dips and interruptions | BS EN/EN61000-4-11 | >95% dip 0. 5 periods, 30% dip 25 periods, >95% interruptions 250 periods | ||||||||||||
| OTHERS | MTBF | 1133.6K hrs min. Telcordia SR-332 (Bellcore) ; 137.1K hrs min. MIL-HDBK-217F (25℃) | ||||||||||||
| DIMENSION | L*W*H | 127×76.2x41mm | ||||||||||||
| 5″x3″x1.61″inch | ||||||||||||||
| PACKING | P.W. | 0.46Kg | ||||||||||||
| Q’TY | 30pcs | |||||||||||||
| G.W. | 14.8Kg | |||||||||||||
| M’MENT | 0.96CUFT | |||||||||||||
Applications
- Industrial automation machinery
- Industrial control system
- Mechanical and electrical equipment
- Electronic instruments, equipments or apparatus
- Power sourcing equipment of PoE
