MW Mean Well Meanwell 1000W Switching Power Supply for Harsh Environment HEP-1000 series

Features

Power or charger mode switchable by SBP-001(Terminal type)
High efficiency up to 96%
Aluminum case fanless design and filling with heat-conducted glue and able to withstand 10G vibration test
Wide operating temperature range -40 〜+70 ℃
Charger for lead-acid batteries (flooded, Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese)
Built-in default 2/3 stage charging curves and programmable curve
Built-in PMBus protocol / CANBus protocol (optional )
Output voltage and constant current level programmable
Protections: Short circuit / Overload / Over voltage / Over temperature
Built-in remote ON-OFF control (Terminal type)
DC OK active signal and 12V Auxiliary power available
LED indicator for power on (Terminal type)
IP67 design for indoor or outdoor installation (Wiring type)
6 years warranty

Mean Well HEP-1000 Series Data Sheet Download

1000W Switching Power Supply HEP-1000 Series for Harsh Environment

Description

HEP-1000 is a 1000W industrial AC/DC power supply featuring the outstanding capability to operate under highly humid, dusty, oily, and high-vibration harsh environment. The entire series is housed with the aluminum case and fully potted with heat-conducted glue. Adopting the full range 90〜305VAC input, the entire series provides an output voltage line of 24V, 48 V and 1 00V. In addition to the high efficiency up to 96%, that the whole series operates from -40℃ 〜70℃ under air convection without fan. HEP-1 000 has the complete protection functions and 1 0G anti-vibration capability ; It is complied with the international safety regulations such as TUV BS EN/EN62368-1 UL62368-1, and the design refers to BS EN/EN61558-1 and BS EN/EN60335-1 HEP-1 000 series serves as a high performance power supply solution for various industrial and charger applications.

In Mean Well power supply HEP Family, there are HEP-100 series, HEP-150 series, HEP-185 series, HEP-240 series, HEP-320 series, HEP-480 series, HEP-600C series, HEP-600 series, HEP-1000 series, HEP-2300-HV series and HEP-2300 series.

Mean Well HEP-1000 Series Model Encoding

hep-1000_model_encoding — HEP-1000 Model Encoding

Specification

MODEL		HEP-1000-24口口	HEP-1000-48口口	HEP-1000-100口口
OUTPUT	DC VOLTAGE	24V	48V	100V
	RATED CURRENT	42A	21A	10A
	RATED POWER	1008W	1008W	1000W
	RIPPLE & NOISE (max.) Note.2	200mVp-p	250mVp-p	500mVp-p
	VOLTAGE ADJ. RANGE	By built-in potentiometer, SVR
		24 ~ 30V	48 ~ 60V	100~125V
	VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	1800ms, 80ms at full load 230VAC /115VAC
	HOLD UP TIME (Typ.)	16ms / 230VAC at 75% load 12ms / 230VAC at full load
INPUT	VOLTAGE RANGE Note.4	90 ~ 305VAC 250 ~ 431VDC
	FREQUENCY RANGE	47 ~63Hz
	POWER FACTOR (Typ.)	PF>0.99/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load
	EFFICIENCY (Typ.)	95% 96% 96%
	AC CURRENT (Typ.)	10.1A / 115VAC 5.3A / 230VAC 4.5A / 277VAC
	INRUSH CURRENT(Typ.)	Cold start 40A at 230VAC
	LEAKAGE CURRENT	<0.75mA / 240VAC
PROTECTION	OVERLOAD	105T 25% rated current
		Protection type: Constant current limiting, shut down O/P voltage after 5 sec. After O/P voltage falls, re-power on to recover
	SHORT CIRCUIT	Constant current limiting, unit will shut down after 5 sec, re-power on to recover
	OVER VOLTAGE	30 ~ 35V 60 ~ 70V 125 ~ 145V
		Protection type :Shut down O/P voltage,re-power on to recover
	OVER TEMPERATURE	Protection type :Shut down O/P voltage, recovers automatically after temperature goes down
FUNCTION	OUTPUT VOLTAGE PROGRAMMABLE(PV) Note 5	Adjustment of output voltage is allowable to 50 ~ 125% of nominal output voltage Please refer to the Function Manual.
	OUTPUT CURRENT PROGRAMMABLE(PC) Note 5	Adjustment of constant current level is allowable to 20 ~ 100% of rated current. Please refer to the Function Manual.
	REMOTE ON/OFF CONTROL	Power ON: Short circuit Power OFF: Open circuit
	AUXILIARY POWER	12V @ 0.5A tolerance ±10%, ripple=150mVp-p
	DC-OK SIGNAL	The TTL signal out, PSU turn on = 4.4 ~ 5.5V; PSU turn off = -0.5 ~ 0.5 V. Please refer to the Function Manual.
ENVIRONMENT	WORKING TEMP.	-40 ~ +70 ℃ (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80℃, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC (Note.7)	SAFETY STANDARDS	UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved; design refer to BS EN/EN61558-1, BS EN/EN60335-1(by request)
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/ 70%RH
	EMC EMISSION	Parameter	Standard	Test Level / Note
		Conducted	BS EN/EN55032 (CISPR32)	Class B
		Radiated	BS EN/EN55032 (CISPR32)	Class B
		Harmonic Current	BS EN/EN61000-3-2	Class A
		Voltage Flicker	BS EN/EN61000-3-3
	EMC IMMUNITY	BS EN/EN55024, BS EN/EN61000-6-2
		Parameter	Standard	Test Level / Note
		ESD	BS EN/EN61000-4-2	Level 3, 8KV air ; Level 2, 4KV contact
		Radiated	BS EN/EN61000-4-3	Level 3
		EFT / Burst	BS EN/EN61000-4-4	Level 3
		Surge	BS EN/EN61000-6-2	2KV/Line-Line 4KV/Line-Earth
		Conducted	BS EN/EN61000-4-6	Level 3
		Magnetic Field	BS EN/EN61000-4-8	Level 4
		Voltage Dips and Interruptions	BS EN/EN61000-4-11	>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF	583.7K hrs. min. Telcordia SR-332 (Bellcore) ; 52.3K hrs. min. MIL-HDBK-217F (25℃)
	DIMENSION	31014448.5mm (LWH)
	PACKING	4Kg; 4pcs/17Kg/1.04CUFT

Application

Industrial automation machinery
Industrial control system at harsh environment
Mechanical and electrical equipment
Electronic instruments, equipments
5G telecom equipments
Robotic lawn mower/AMR/AGV
Equipments or instruments with back-up battery

Mean Well HEP-1000 Series Video Show

Find us on SNS

You can find us and know more about us on SNS: